|
Post by marksf150 on Oct 29, 2005 23:17:37 GMT -5
i need to lift my 2000 f150 up a couple more inchs i got a 6 inch suspension lift and i got the bars cranked all the way so what else could i do
|
|
|
Post by BirdDog on Oct 30, 2005 1:34:12 GMT -5
First off I would like to Welcome you to STL and seen your truck on FTW and it is a sweet RIG!! Ok I beleive you are running a IFS in front and leaf springs in the rear. Well the there is a few things that you can do in my opinion.... PA 3" inch body lift kit (Not a body lift person myself) www.performanceaccessories.com/You can go with a bigger susp. lift (May cost some money) 10 inch to 14 inch kits Full Throttle www.fullthrottlesuspension.com/Well hope this helps out and when you get the chance make a gallery and add some pics of the RIG!! Whiplash Suspension www.wholesalesuspensionoutlet.com/new_page_2.htm
|
|
|
Post by frenzy on Oct 30, 2005 3:59:54 GMT -5
Welcome !!!!
|
|
BRC
3" body lift
Roll Tide!!!
Posts: 86
|
Post by BRC on Oct 30, 2005 15:25:00 GMT -5
welcome
|
|
bigreen
6" Suspension
Farmboy Fabrications
Posts: 243
|
Post by bigreen on Nov 7, 2005 17:30:37 GMT -5
i would never fun whiplash...fullthrottle if i had to...i dont like the look of my body lift at all, wish i didnt have it, have considered taking it off...but in ur situation, i think its the safest, most cost effective, and best (part replacement wise) option there is...
i think a 2" body looks 100x better than a 3" as well, and its easier to put on, so id consider that as an option...Performance Accessories is by far the best, and if your on FTW, do a mod search or look through some galleries...theres plenty of guys on there with 9" and anywhere from 36's to 40s
|
|
bigreen
6" Suspension
Farmboy Fabrications
Posts: 243
|
Post by bigreen on Nov 7, 2005 17:34:08 GMT -5
heres my buddy with 6" fabtech, 3" body, 1.5" from the torsions, and a rear add a leaf...with 2.5"(front) and 3"(rear) wheel spacers on 40" ground hawgs (measure like 38.5") yeah it rubs
|
|
|
Post by apbt3178 on Nov 7, 2005 17:37:31 GMT -5
Those would be my old Ground Hawgs...
|
|
bigreen
6" Suspension
Farmboy Fabrications
Posts: 243
|
Post by bigreen on Nov 7, 2005 17:58:27 GMT -5
still 95% too!!
|
|
|
Post by apbt3178 on Nov 7, 2005 18:28:17 GMT -5
Those d**n things wear like IRON. Sometimes I miss them, but then I look at the Boggers...
|
|
bigreen
6" Suspension
Farmboy Fabrications
Posts: 243
|
Post by bigreen on Nov 7, 2005 19:07:43 GMT -5
haha they are f**king beasts...i really wonder how they will wear in the hands of interco, but still, boggers=fantasmic
|
|
|
Post by marksf150 on Nov 8, 2005 21:04:28 GMT -5
thats a sweet lookin truck i got a 4.5 to 6 inch donohoe racing lift on my truck with bar cranked
|
|
|
Post by marksf150 on Dec 4, 2005 12:38:37 GMT -5
so yall are tellin me that i can fit 36-40 on my truck if i get 9 inchs of lift
|
|
bigreen
6" Suspension
Farmboy Fabrications
Posts: 243
|
Post by bigreen on Dec 4, 2005 14:52:37 GMT -5
yes indeed... #rockon5nk# ive never seen that DR kit for the F150s...i would only imagine that it is one badass mofo!! heres another on 38s and 9 " his tires and rims are also for sale
|
|
bigreen
6" Suspension
Farmboy Fabrications
Posts: 243
|
Post by bigreen on Dec 4, 2005 14:55:35 GMT -5
take ur Tbars down two or three turns too, if they are maxed out...that increases balljoint wear by 50% and it weakens ur bars after time
|
|
liftedfx4
3" body lift
Don't drink and drive, stop and sip.
Posts: 36
|
Post by liftedfx4 on Dec 11, 2005 4:22:05 GMT -5
I only have 8" lift that sags and I fit 37x13.50 boggers with no problem. It's 5.5" trash master suspension and 3" body. I'm going to crank my t-bars and replace the stock rear block with a 5" so it'll sit a little higher, but that's just for personal preference, not to try to clear anything, for now. Soon to start working on the Rockwells and 52's!!!!!!
|
|
|
Post by BirdDog on Dec 15, 2005 1:55:49 GMT -5
bigreen, I have sent that guy a email about this site and no reply, if you know him give him a yell!!! That is a sweeet white ford...
liftedfx4, I can not wait to see that beast on some 52's!!!
|
|