|
Post by BirdDog on Dec 17, 2005 7:58:41 GMT -5
I have a buddy that is waning to put this on his jeep and wondering if anyone has that on there ride. Also can I get a link to were I can find it. Thanks
|
|
yomuda
6" Suspension
Posts: 383
|
Post by yomuda on Dec 17, 2005 18:19:15 GMT -5
I may be wrong (wont be the first time my wife says) but arnt they all unibodys? #dunno#
|
|
|
Post by BirdDog on Dec 18, 2005 2:28:51 GMT -5
Well I know that they are one peice not like a truck is, but do you think they don't make them. Been looking and I can not find anything. Thanks
|
|
|
Post by W.F.O. Bogger on Dec 18, 2005 3:05:22 GMT -5
hey birddog, i think there were a couple yrs were they wern't uni bdy so unless its one of them yrs no body lift for it.... sry only way for lifting would be sum type of a levelin kit or suspesion lift
|
|
|
Post by BirdDog on Dec 19, 2005 6:01:45 GMT -5
It is a 2000 Jeep Cherokee, and I guess he is going to have to go with a suspension lift. I am going to install it when I get home and after a short vacation. I would say around March! I will keep yuou guys posted and he is wanting to be a member and that is a good thing.
|
|
|
Post by apbt3178 on Dec 19, 2005 22:24:39 GMT -5
'00 is definitely a uni-body! Look to these guys if your buddy wants a killer, flexy, suspension lift! www.rockkrawler.com/I've turned a few customers onto them and haven't had any complaints yet!
|
|
|
Post by BirdDog on Dec 20, 2005 2:11:51 GMT -5
Thanks alot for the help and will check it out!
|
|
Fiji
3" body lift
Just Dead Sexy!!
Posts: 86
|
Post by Fiji on Dec 20, 2005 8:12:36 GMT -5
as far as i know the cherokees, are all with the unibody design at least from 88 on, rockcrawler, superlift, skyjacker, rubicon express all make lifts for that truck
|
|
|
Post by BirdDog on Dec 21, 2005 11:56:30 GMT -5
Well I just got done looking up a 4 inch lift and they are not that expensive. He is not wanting to up up to much. Just want to run 33's and I think 4 inches will work!
|
|
dline
3" body lift
Posts: 64
|
Post by dline on Dec 23, 2005 13:47:58 GMT -5
33's will require more than a 4" lift.
33's might work with alot of fender trimming possibly.
I have a 3" and it barely clears 31's.
|
|