|
|
Post by BirdDog on Feb 24, 2007 10:59:19 GMT -5
I see not just only me are checking out other site other than DTW! Well welcome aboard and we need to start a Lambo Club! lol
BD
|
|
|
|
Post by HEMI2NV on Mar 2, 2007 8:00:14 GMT -5
i always was on other site.. but since late nov i gave up on the site as you could see with i removed all my pic from there . They aren't worthy to have pics of my POS truck on there. maybe if they give me money from all those advertisements they have going on...you check out the horrible beta version of the new look site..lambo door club...LOL
BTW thanx for the welcoming
|
|
|
|
Post by BirdDog on Mar 3, 2007 11:14:52 GMT -5
Now that you say that, I have noticed members were leaving! But you are welcome here and VD is a good site too.
BD
|
|
|
|
Post by HEMI2NV on Mar 3, 2007 17:07:04 GMT -5
thank you much.. I stop in from time to time
|
|
|
|
Post by BirdDog on Mar 3, 2007 19:23:08 GMT -5
What program do you use to make your signature block? I like how you have yours and the lambo doors! I would like to have mine done in some hunting background or something!
|
|
|
|
Post by HEMI2NV on Mar 5, 2007 20:03:07 GMT -5
i had a guy do it over on Dodge Talk
I'm up for Ram of the Month there for this month
|
|
|
|
Post by BirdDog on Mar 7, 2007 11:12:13 GMT -5
I sent you a email about the lambo doors! Congrats over there in Dodge Talk!
|
|
|
|
Post by HEMI2NV on Mar 8, 2007 18:58:49 GMT -5
GOT IT SORRY I COULDN'T HELP YOU MUCH MORE THAN WHAT I SENT YA
|
|
|
|
Post by BirdDog on Mar 10, 2007 10:19:07 GMT -5
That is okay, I have replaced them both and they are working good for now! But just got done replacing my wheel bearings last night. One thing to another.
|
|
|
|
Post by HEMI2NV on Mar 11, 2007 5:52:35 GMT -5
how much does your rims/tires weigh?? Mine are around 140-145 each
does our truck give any warnings that they are about to go?
|
|
|
|
Post by BirdDog on Mar 11, 2007 11:45:48 GMT -5
Not to sure on what they weight, but they will start making a sqeaking noise as the tire rotates. Like grinding metal and it is really loud. Now this is if you have a 1500!
Now to check it...
Jack the truck up and try to move the tire up and down, there should be no play. If so, take the rotor and brake caliper off and see if it is leaking grease from the wheel stud plate that is attached to the spindle. Mine was leaking and I know that the hud was TOAST!! Unscrew the three bolts in the back and bang the hell out of it with a hammer till it flies out.
I just bought a set of stock rims and tires that I am going to use when I do them long drives. It is not my daily driver and only go to truck shows.
Hope this helps you out and it is not a cheap part either. $$$
BD
|
|
|
|
Post by HEMI2NV on Mar 11, 2007 19:53:27 GMT -5
thanx for the 411
|
|
